I-DX51D GI/PPGL/PPGL COIL FACTORY
1.Ukucaciswa:
| Ikhoyili Yensimbi Ependwe Ngopende / Ishidi | |
| Okujwayelekile | ISO,JIS,AS EN,ASTM |
| Ibanga | Q195 Q235 Q345 |
| I-SGCC SGCH SGC340 SGC400 SGC440 SGC490 SGC570 | |
| SGHC SGH340 SGH400 SGH440 SGH490 SGH540 | |
| DX51D DX52D DX53D DX54D DX55D DX56D DX57D | |
| S220GD S250GD S280GD S320GD S350GD S400GD S500GD S550GD | |
| SS230 SS250 SS275 | |
| Ububanzi | 600mm ukuze 1500mm |
| Ubukhulu | 0.125mm ukuze 4.0mm |
| I-Zinc coating | 40 ukuze 275GSM |
| I-substrate | I-substrate egoqwe ebandayo / i-Hot rolled Substrate |
| Umbala | I-Ral Color System noma njengesampula yombala womthengi ngamunye |
| Ukwelashwa kwendawo | I-Chromated ne-oiled, kanye ne-ant-finger |
| Ukuqina | Ithambile, iqinile futhi iqinile ikhwalithi |
| Isisindo sekhoyili | Amathani ama-3 kuye kwayi-8 |
| I-ID yekhoyili | 508mm noma 610mm |
2.Usayizi Otholakalayo
| Igama | Ubukhulu | Ububanzi |
| Ikhoyili Yensimbi Efakwe Ngopende Efakwe ngaphambilini Ediphu Eshisayo | 0.2 ~ 1.5mm | 600 ~ 1250mm |
| Ikhoyili Yensimbi Efakwe I-Al-Zn Ependwe kusengaphambili engu-5%. | 0.2 ~ 1.5mm | 600 ~ 1250mm |
| Ikhoyili Yensimbi Efakwe I-Al-Zn Ependwe ngaphambili engu-55%. | 0.2 ~ 1.38mm | 600 ~ 1250mm |
| Uhlobo Lomkhiqizo | Ikhoyili Yensimbi Efakwe Ngangaphambili Ependwe Ngaphambili (i-PPGI) | I-Hop-Dip Ependwe Ngaphambili engu-5% Al-Zn Coated Steel Coil (PPGF) | I-Hop-Dip Ependwe Ngaphambili engu-55% Al-Zn Coated Steel Coil (PPGL) | Ikhoyili Yensimbi Ependwe Ngaphambili |
| Izinhlobo Zokumboza | 1. I-polyester (PE) 2. I-Silicone Modified Polyester (SMP) 3. I-Acrylic 4. I-Polyvinylidine Difluoride (PVDF) | I-PVC Plastisol | ||
| Imininingwane | I-CNS 10804 (2013) I-CNS 15298 (2013) I-CNS 15299 (2013) I-JIS G3312 (2013) I-CGCC CGCD1~3 CGC340 CGC400 CGC440 CGC490 CGC570 I-JIS G3318 (2013) CZACC CZACH CZACD1 CZAC340 CZAC400 CZAC440 CZAC490 CZAC570 I-JIS G3322 (2013) I-CGLCC I-CGLCD I-CGLC400 I-CGLC440 I-CGLC490 I-CGLC570 I-ASTM A755M (2016) AS 2728 (2013) I-EN 10169+A1 (2010) | I-JIS K6744 (2007) SG SA I-ASTM A755M (2016) I-EN 10169+A1 (2010) | ||
| Izinhlobo Zokumboza | I-Primer: PU noma i-Epoxy 5μm Ijazi eliphezulu: 15-20μm I-Back Primer: PU noma i-Epoxy 2μm Ijazi Emuva: PE noma i-Epoxy 5-12μm | Okokuqala: Epoxy Ijazi eliphezulu: I-PVC PLASTISOL 150- 250μm I-Back Primer: PU noma i-Epoxy 2μm Ijazi Emuva: I-PVC PLASTISOL 100 - 250μm noma i-Epoxy 7μm | ||
| Ukwelashwa Okungaphezulu | Ifilimu yokuzivikela ingasetshenziswa Insimbi Embossed Ukhuni lomsedari I-Stucco Isikhumba | I-PVC Embossed Isikhumba I-Lichee | ||
| Ukuphawula | 1. Amazinga e-ASTM ethulwe lapha asebenzisa isistimu yemethrikhi efanayo.(Isistimu yombuso isusa okuthi “M” ngemva kwenombolo yayo ecacisiwe, njenge-A755 ne-A792.) 2. Ukujiya kwe-coating kungokwasethenjwa kuphela. | |||
Bhala umyalezo wakho lapha futhi usithumelele wona
